Qoltec Automatic Voltage Stabilizer AVR PRO 1000VA 3%

Safe and stable operation

Many of us use generators. We use them to power our tools in the garden, on construction sites, in the garage, as well as to power food trucks or caravan trailers. We will use them in any place where we do not have access to a socket or the power we receive is not very stable. If your generator is not equipped with an automatic voltage stabilizer (AVR), your devices are at risk of malfunction or damage. The ideal solution is a Qoltec brand device that ensures stable voltage and the proper operation of the devices powered by it.

Protect your device

By choosing our solution, we offer:
- a combination of voltage stabilizer and surge protection functions,
- The stabilizer is equipped with a special short-circuit protection function,
- protection against voltage fluctuations, maintaining a stable 230V voltage,
- be sure that if the voltage is too high, the stabilizer will disconnect the device from the network, interrupting the input current,
- built-in LCD display, which allows you to read the parameters,
- compact dimensions and a built-in handle, so you can take the device with you anywhere.

Wide compatibility
The stabilizer works with devices such as:
- server, router, modem,
- computer sets and network components,
- RTV equipment, such as TV, music equipment

Delay function
The stabilizer is equipped with a delay function. The default delay time is 6 seconds. This function is useful for motor and compressor products to prevent and protect the device from damage caused by frequent power-on after power-off. The maximum delay time is 180 seconds.

Features
Required protection (fuse): 5A
Operating temperature: -10˚C ~ +40˚C
Protection: IP20
Protections: - Overvoltage protection - Short circuit protection - Overheating protection
Frequency: 50 - 60 Hz
Input voltage setting range: 140 - 260 V
Output voltage: 230V
Power factor: 0.8
Transformer: Servo motor
Power: 1000VA/800W
Type: Single-phase
Efficiency: >95%
Application:
The stabilizer works with devices such as: - server, router, modem, - computer sets and network components, - electronic equipment, e.g.
Sockets: 2 x SCHUKO
Connectors: None