Qoltec Mobile charger for EV with regulation 2-in-1 type2 | 7kW | 230V | CEE 3 PIN | LCD | Portable | Wallbox | 5m

Fast charging, Ideal for long journeys

Don't let a low battery stop you from using your electric vehicle. With the Qoltec mobile charger, you can charge your car battery in just a few hours. The portable charger is perfect, for example, for longer vacations, thanks to its compact design it takes up little space and can be easily transported directly in the trunk or in the included bag. The charger is powered from a standard 3-pin 16A socket, while the car is connected via a Type 2 car charger connector.

European connector standard

High charging capacity, 7-pin type 2 connector that meets current regulations, four options (16A, 20A, 24A, 32A) for optimal charging
The charger has a Type 2 connector, which is now an official European Union standard, and will charge electric cars equipped with a suitable charging socket. The type 2 connector has 7 pins, of which 3 or 5 pins are for charging and 2 are for communication between the station and the car. Compatible with most electric cars sold in Europe. The Qoltec brand charger supports four current modes: 16A, 20A, 24A and 32A. It is worth mentioning that the Type 2 connector is designed for electric vehicles with a charging power of more than 3 kW.

Multi-function LCD display
Comfortable 2.4" LCD display, Accurate charging time monitoring, Temperature sensor for safe operation of the charger, Automatic error correction
The product is equipped with a multi-function 2.4-inch LCD display and LEDs indicating the charging status. On the display we know the following:
- Set the current value with the button: 16A, 20A, 24A, 32A;
- check the exact charging time,
- set the charging time delay simply with the button with the clock icon,
- monitors the operating temperature of the charger in real time thanks to the built-in plug temperature sensor, the charger immediately interrupts operation if the safe value is exceeded, and automatically resumes operation when the temperature returns to the normal level,
- monitors the progress of the charging process,
Delayed charge function
Intuitive handling, Intelligent charging delay function for 1, 2, 5 or 8 hours

Waterproof polycarbonate housing
Durable and atmospheric housing made of non-flammable polycarbonate, Easy external attachment, Water and dust resistant
Our chargers are made of durable, UV-resistant, non-flammable polycarbonate. In addition, the charger shows high water resistance and dust resistance. The housing has special holes for external mounting.

Properties:
Type 2
Number of phases 1
Maximum power 7 kW
Nominal voltage 230V
Operating current 16/20/24/32A
Frequency 50 Hz
Plug type 3-PIN CEE
Insulation resistance > 10MΩ
Charging interface typeIEC 62196-2
Cable cross-section 3*6mm² + 1*0.5mm²
The diameter of the cable is 10.8 mm
Cable length 5 m
Compatibility TYPE 2 is compatible with most electric cars in Europe
SafetyOver voltage protection
Overcurrent protection
Ungrounded protection
Temperature monitoring
Short circuit protection
Protection against leakage
IP classification IP65
CE certificate