Qoltec Monolith DC-DC charger for LiFePO4 AGM 12V batteries | 60A | 720W

Compatible with a wide range of batteries
Our Monolith charger is designed to work seamlessly with a wide range of battery types including AGM, GEL, Calcium, SLA, Li-ion, EFB and LiFePO4 batteries, providing a stable and safe power source. It is ideal for 4WD vehicles i.e. caravans and motorhomes, trucks, other commercial vehicles, but will also be a good choice for boat and yacht owners.

Intelligent 3-stage charging
The Monolith DC-DC charger charges the starter battery using an intelligent 3-stage charging process, which consists of:
- The BULK stage is the identification of the battery and its needs, up to 80% charging with constant current, high voltage,
- The BOOST stage is the so-called absorption charge, which maintains the charging voltage between 14.1VDC and 14.8VDC, reducing the input current,
- The FLOAT stage is the last charging cycle, in which the battery has already reached 95% of its capacity and gradually reaches 100%, the charging voltage decreases to a constant value between 13.0 VDC and   13.8 VDC, the charging current is automatically reduced. To 0A when the battery is charged.

How to connect the battery correctly?
To charge our battery, we need to correctly connect the D+ ignition cable to the DC-DC charger from the D+ input to the 12V source, and select the appropriate battery type using the 5D button on the side of the charger. After selecting the appropriate battery type, the charger is ready to use. All we have to do is start our starter battery, which is activated while driving. As soon as the 12V signal arrives, the device turns on, the power indicator lights up green, and the battery starts charging. We recommend using 18-16AWG copper cable.

Safety is our priority
When designing DC-DC chargers, we put safety first, which is why the product is equipped with comprehensive protection functions, including reverse polarity, overvoltage, and overheating protection.
UVP protection - protects against output voltage drop,
SCP protection - short circuit protection,
OVP protection - protects against output voltage that is too high,
OCP protection - protection against line current that is too high,
OTP protection - overheating protection.

Features
Note: Use only 12V batteries. Damage caused by connecting higher voltage batteries is not covered by the warranty. The kit does not include cables.
Certificate: CE
Additional Information: We recommend using 18-16AWG D+ copper cable (cable not included)
Operating Temperature: -20˚C ~ +50˚C
Application: LiFePO4 GEL SLA AGM EFB Calcium Li-ion
Charging Type: DC-DC
Power: 720W
Input Voltage: 12VDC
Output Voltage: 12VDC
Output Current: 60A
Connector: M6 x 10mm
Efficiency: 90%
Battery Overcharge Protection: Yes