Qoltec Uninterruptible Power Supply UPS for RACK | 3kVA | 3000W | Power factor 1.0 | LCD | EPO | USB | On-line
Description
Eliminates the risk of data loss and equipment failure due to power outages or voltage drops
The Qoltec UPS is the perfect solution for those who value business continuity and security in their IT infrastructure. This state-of-the-art on-line UPS provides uninterrupted power supply, eliminating the risk of data loss and equipment failure due to power outages or voltage drops. This way, you can be sure that your servers and equipment will operate smoothly, ensuring stable operation and the security of stored information.
Power factor 1.0, zero switching time, double conversion, ECO mode and more
The Qoltec 3kVA RACK UPS is distinguished by :
- power factor of 1.0 - all supplied electrical power is used to do the job, which is the optimum situation in the energy efficiency of the electrical system,
- pure sinusoidal energy without interference,
- the zero switching time is the rate at which the UPS will switch to battery mode in the event of a power failure,
- protection against overloading, short-circuiting and overheating,
- double conversion - stable power supply,
- ECO mode - provides the best balance between energy saving and power conservation,
- extended back-up time - the additional time the UPS will be able to autonomously supply power to the connected equipment in the event of a main power failure,
- true Isolation technology - offers the most complete power protection and highest power quality for all IT applications,
- built-in service bypass - for trouble-free unit maintenance,
- the possibility of mounting an SNMP card or connecting an SNMP adapter - this is a network management standard with which you can quickly and easily collect information about connected devices or configure their parameters,
- EPO interface - a function that allows the power supply to be shut down remotely in emergency situations,
- RS-232 port and RS-232 cable - is a communication bus designed for serial data transmission,
- built-in set of 6 x 7Ah batteries,
- 2 fans - ensure intensive cooling of the unit during continuous operation.
Pure sine wave - the highest quality and safety in powering your devices
Qoltec RACK UPS units offer stable, interference-free, pure sine wave power. It provides complete protection for your devices thanks to double conversion, which first converts the AC power supply voltage into DC and then into AC, thus ensuring the highest level of power quality and protecting against possible network disturbances such as voltage drops, power outages, surges and failures.
Your reliable partner in maintaining your equipment
The voltage of the online uninterruptible power supply is constantly recycled; in the event of an unexpected drop in the mains voltage, the UPS maintains the operation of the connected device thanks to the built-in batteries, which are constantly charged. Thus, the mains power is only needed to charge the batteries. Permanently connected devices always receive clean power, without interference from the battery, so the output voltage of the online UPS will always be constant, regardless of the input voltage. The backup time of the device ranges from a few minutes to several hours, which allows you to save data and safely turn off the device, minimizing the risk of data loss and damage to the device.
Easily manage your power supply thanks to the easy-to-read LCD display
Thanks to the built-in LCD display, the device is intuitive and convenient to operate. On the screen, you will receive up-to-date information about the operating status and most important parameters of the power supply. This ensures that you are up-to-date on the operation of the unit, allowing you to quickly react to any problems and optimize operation according to your needs. Working with the power supply becomes simple, fast and reliable, so you can focus on your main tasks without worrying about the stability of the power supply.
Features
UPS type On-line
Waveform Pure sine wave
Power 3000W
Rated power 3kVA
Rated voltage 230 VAC
Input voltage 110 - 300 VAC ± 5%
Output voltage 230VAC
Output frequency 50/60Hz ± 0.05HZ
Load device typePC, servers
Built-in battery Yes
Battery number 6
Battery voltage 12V
Battery capacity 7Ah
Battery voltage 72V
Power factor 1.0
Crest factor 3:1
Transfer time 0ms
Overload Switch to bypass after 4 ms
Sockets 2 x SCHUKO
1 x RS 232
Communication interfaceUSB, RS-232, EPO
Use Computers, servers, alarm systems, routers; industrial and manufacturing environments; healthcare centers.
Security - Overload protection
- Overvoltage protection
- Short circuit protection
- High and low voltage protection
More information - Possibility to connect a compatible SNMP module: product code 50398
Notes Network uninterruptible power supplies, commonly known as uninterruptible power supplies (UPS), designed for telecommunications equipment and data processing hardware. They provide "energy reserve" in the event of a power outage, thereby protecting against data loss.
Operating temperature 0˚C ~ +40˚C
CE, ROHS certification
Consumption Duration
100W 181 minutes
200W 90 minutes
300W 60 minutes
500W 36 minutes
1000W 18 minutes
Parameters
Built-in battery | Yes |
Size | 525 x 438 x 88 mm |
Input voltage | 230V AC /72VDC |
Output voltage | 230VAC |
Rack? | Rack |
Storage | External warehouse |
Type of sine wave | Tiszta szinuszhullám |
Weight | 22 |
Battery voltage | 12V |
Battery Capacity | 7Ah |
Number of batteries | 6 |
Number of connections | 2 |
Type of connections | 2 x SCHUKO |
UPS technology | Online |
Output power (VA) | 3000VA |
Watt-hour capacity | 504 |