Victron Energy VE.Direct 48V 500VA/400W inverter IEC

The Victron VE.Direct communication port allows you to connect the photovoltaic inverter to:

• A computer (requires a VE.Direct to USB interface cable).

• Apple and Android smartphones, tablets, MacBooks, and other devices (requires a VE.Direct to Bluetooth Smart dongle).

The Phoenix 12/500 inverter is fully configurable:

• Alarm and reconnection levels for low battery voltage

• Disconnection and restart levels for low battery voltage

• Dynamic cut-off: disconnection level depending on the load

• Output voltage adjustable between 210 – 245 V

• Frequency selectable: 50 Hz or 60 Hz

• ECO mode on/off and ECO mode level sensor

ECO Mode Operation
The inverter remains in standby when the output power drops below a preset threshold. While in standby, the inverter activates briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter stays on.

High peak power capability
One of the strengths of the SinusMax technology is its very high peak power. Phoenix inverters are designed to power demanding loads such as motors or electric tools with high start-up surges.

Remote on/off switch
This solar inverter model allows for a remote On/Off switch connection, making it possible to turn the inverter on or off remotely using two cables. This feature is especially appreciated by customers using the inverter in motorhomes, boats, or sailing yachts.

Technical specifications – Victron Phoenix 48/500 VE.Direct SCHUKO Inverter – PIN485010200
Refer to the technical data sheet for detailed specs.