Qoltec Battery charger with repair function | Intelligent microprocessor charger | 12V | 6A | LED | 4 modes

Excellent efficiency thanks to intelligent control
Qoltec battery charger with 4 modes, suitable for various battery types
Choosing the right battery charger is extremely important if you want your battery to serve you for a long time. The wrong charger can result not only in longer charging time, but also in a significant decrease in battery life.

The Qoltec brand charger is microprocessor precision charging, offers 4 modes, which greatly simplifies the charging process, you only need one charger for different battery types and supports: - Car mode for GEL, SLA, WET, DEEP CYCLE, EFB and calcium batteries, - AGM- mode for AGM batteries, - Moto mode for batteries with a maximum charging current of 1.5A - Repair mode for batteries that need to be refurbished.

The time required to recharge depends on the rate of discharge and actual capacity of the battery. The charger is designed to charge the batteries of cars, motorcycles, boats, lawn mowers, agricultural vehicles and quads.

Trust our chargers - enjoy uninterrupted power
Rectifier with microprocessor, automatic shutdown after charging, advanced safety features, built-in fan for total comfort
The microprocessor-controlled charger guarantees the safety of full use, personalized charging for each battery type, automatically shuts off when the battery is fully charged, so the battery is ready. So you don't have to worry about overcharging your battery.

Now you can charge your battery safely and quickly. The product has advanced protection features including reverse polarity, overvoltage and overcharge protection. In addition, a built-in fan protects the device from overheating.

Accurate charge management in three steps
The charger uses intelligent 3-stage charging, adjusting the charging voltage and current to the current state of charge of the battery, consisting of 3 stages:

Stage CC is charging up to 80% of the battery capacity, keeping the maximum current at a constant value and high voltage,

CV stage, the charger keeps the charging voltage constant between 14.1 VDC and 14.8 VDC, reducing the charging current,

The FLOAT stage is the so-called maintenance, in which the battery has already reached 95% of its capacity and gradually reaches 100%, the charging voltage decreases to a constant value between 13.0 VDC and 13.8 VDC.

Multifunctional LED display

The charger has a large and clear LED display, so you can easily see the process and the most important charging parameters. You can constantly monitor the state of the battery, check the voltage and current, as well as the currently selected operating mode, so working with the device is easy and intuitive not only for professionals.

Advanced battery recovery mode
Our charger is ideal for rescuing a battery that has died, which is usually the result of the battery being completely discharged and remaining in that state for an extended period of time. We can then notice that the battery does not take up the charging current or that it heats up significantly. Repair mode is a special recovery mode of approximately 16 hours for batteries that have not been used for a long time or for very low voltage sulfate batteries, for example. With this function, the charger can help extend the life of the battery or regenerate it.

Properties:
Power 2.5W
Input voltage 220-240 V
Output voltage 12V
Output current 6A
Rechargeable battery capacity 4Ah - 120Ah
Protection Reverse polarity protection
Surge protection
Short circuit protection
Overcurrent protection
Protection against overheating
Low voltage protection