PATONA dual charger for Fuji NP-W126 FinePix with power bank function and memory card storage

PATONA dual charger for Fuji NP-W126 FinePix with power bank function and memory card storage

With the new PATONA Dual Charger for Fuji NP-W126 you have everything in one box. Store and charge up to two batteries at the same time. Furthermore, there is room for up to 2 SD cards for storage. The batteries can be used as an external power bank. A modern microcontroller controls the electronics. The charger can be connected to the power source either via USB-C, USB-A or micro USB connection. A control display informs you about the current type of use (as a charger or as a powerbank) of the rechargeable batteries.

Usage notes:

As a charger: Connect the unit to a power source. The LEDs flash red / green / blue. Now insert the batteries into the charging cradles. As soon as the LED lights up green, the charging process is complete.
As a power bank: When the batteries are charged, you can use the device as a power bank with a USB-A cable. To do this, connect the USB-A output to a compatible device such as a smartphone or tablet. The LED lights up blue during discharge.

You get a product from PATONA that you can always rely on. Exceptional reliability, long life and beautiful design, will make your photo shoot an unforgettable experience.

Technical data:

Input: USB-C /Micro-USB, 5V/2,1A (min)
Output: USB-A 5V/2,1A, 2x 8,4V/1000mAh *1 und 500mAh *2
USB Power: 5V/2,1A (max)
Weight: 130,3g
Size: 7,3 x 13,3 x 2,9 cm (B x L x T)

Scope of delivery:

Charger, manual, cable USB to Micro-USB

Compatible devices:

• FinePix HS30 EXR
• HS30EXR
• HS-30EXR
• HS33 EXR
• HS33EXR
• HS-33EXR
• X100F
• XA1
• X-A1
• XA2
• X-A2
• XA3
• X-A3
• XA5
• X-A5
• XA10
• X-A10
• XE1
• X-E1
• XE2
• X-E2
• XE3
• X-E3
• XES2
• X-ES2
• XH1
• X-H1
• XM1
• X-M1
• XPro 1
• X-Pro 1
• XPro2
• X-Pro-2
• XT1
• X-T1
• XT3
• XT-3
• VPB-XT3
• XT10
• X-T10
• XT20
• X-T20
• XT100
• X-T100

Compatible batteries:

• Fuji NP-W126
• NPW-126