Victron Energy SmartSolar MPPT 150/35 12V / 24V / 36V / 48V 35A solar charge controller

The SmartSolar version has built-in Bluetooth. If you want the version without Bluetooth, select the model below:

SCC020035000

Solar chargers Solar chargers collect energy from solar panels and store it in batteries. SmartSolar, using the latest and fastest technology, can maximise this energy accumulation and control it so that a fully charged state is achieved in the shortest possible time. SmartSolar keeps batteries in good condition and extends their lifetime. Even heavily discharged batteries can be recharged with the SmartSolar charge controller. The unit can operate at battery voltages as low as 0 Volts, provided the cells are not permanently desulphated or otherwise damaged. Models: 12/24/48 Volt Use the MPPT calculator by clicking here! MPPT: Ultra-fast, peak power point tracking By continuously monitoring the voltage and current output of solar cells (photovoltaic panels), MPPT technology ensures that every drop of available energy in the panels is captured and stored. The benefit is most apparent when the sky is partly cloudy and light intensity is constantly changing. Remote monitoring and control The SmartSolar MPPT charger's extensive range of features can be remotely controlled and monitored via built-in Bluetooth when paired with your smartphone or other device via VictronConnect. If your device is connected to the Internet via a GX device, the Victron Remote Management Portal (VRM) gives you anytime, anywhere access to all MPPT features; both VictronConnect and VRM are free of charge. For remote installations, it is also possible to monitor MPPT via GlobalLink 520 connection even when there is no Internet connection nearby. Power to Load The intelligent Power to Load feature prevents damage caused by fully discharged batteries. You can program the voltage value at which SmartSolar disconnects from the consumer - preventing the battery from being completely discharged. And here's the clever twist: SmartSolar tries to recharge to 100% every day. If this is not possible in unfavourable weather conditions, it will continue to increase the disconnection voltage every day until the operation is successful. The function is called BatteryLife because it allows the device to keep the battery in good condition, increasing its lifetime.

MPPT - Ultra fast and efficient working point tracking algorithm
In cloudy weather, light conditions are constantly changing
The ultra-fast MPTT charge controller achieves up to 30% better energy efficiency than other charge controllers
Achieve up to 10% higher energy production than slower MPPT models
Superior working point tracking algorithm even in cloudy weather
In cloudy weather, the power-voltage curve shows up to 2-3 operating points
Traditional MPTT chargers tend to select the local operating point, but this is not always the best choice
Victron MPTT charge controllers will always find the optimal operating point to achieve the best power output
Programmable charging algorithm
8 pre-programmed charging algorithms that can be selected using a rotary switch
Freely programmable charging algorithms
Built-in temperature sensor - adjust charging voltage depending on temperature
Optional external temperature and voltage sensor for battery
Using Smart Battery Sense or BMV-712 battery monitoring, the charge controller can continuously monitor battery temperature and voltage values
Recovery of a fully discharged battery
Starts charging even when the battery is close to 0V
Built-in Bluetooth Smart
Wirelessly configure, monitor, update and synchronize SmartSolar charge controllers
Direct
Wired connection to various devices, such as ColorControl GX and other GX central controllers, or to the computer
Extensive electrical protection
Protection against overheating and automatic power reduction at high temperatures
Short circuit and reverse polarity protection
Protection against reverse polarity current
High efficiency of up to 98%
Maximum output voltage up to 40°C